Assist in products selection

FEAC-T-032A-P1-0.0M
22070000007

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with type 2 charging device plugs for installation in electric vehicle charging stations (EVSE)

comparison

Products type

Only 4 products can be compared each time. Please select the products you want to replace.

    • Overview
    • Technical data
    • Accessories
    • Certification
    • Business data
    • Download

    Product certification

    Product advantages

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D model
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Temperature Sensor
    9. Environmental Product Compliance
    10. Cable
    11. Dimension

    3D model

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation) -30 °C ~ 50 °C
    Ambient temperature (storage / transport) -40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power26KW
    Phase 3
    Power pin quantity5
    Rated current of high-power contacts32
    Power contact rated voltage 480
    Quantity of signal contacts 2
    Signal contact rated current 2
    Signal contact rated voltage 30
    Signal transmission type Pulse width adjustment
    Connection method precautions Screw connection
    Temperature measurementNTC

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force < 100N

    Installation

    Available installation locationRear board installation
    Limit of the installation location Only allow 0 to 90 degrees frontal tilt
    Lock actuator installation location Top center, can only be installed at the rear
    Mounting hole diameter 6.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basis Provided according to customer requirements
    Contact surface materialAg
    Marking material Plastic

    Locking device

    Lock type Secured by locking device after insertion

    Temperature Sensor

    Sensor typeNTC
    Temperature range _30 °C ... 200 °C

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Cable

    Cable composition 5*6mm²+2*0.75mm²

    Dimension

    Depth101mm
    Hole diameter58 mm x 61 mm
    Wire length0m
    0.4 m (Lock the actuator cable )
    width99mm
    Height127.3mm

    TUV parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 480V
    Rated current 32A
    IP class IP54
    Order number 22070000007
    Packing unit 5pcs/box
    Minimum order quantity 5
    Products weight (without packaging) 13.65
    3D
    FEAC-T-032A-P1-03-0.0M-25AH.stp Download
    CAD Data
    FEAC-T-032A-P1-03-0.0M-25AH.dxf Download
    Data
    FEAC-T-032A-P1-03-0.0M-25A(H).pdf Download
    Online consultation